Showing 19 of 19 results

bhubaneswar, odisha

TIME SWITCH ( TIMER ) SERIES- TSQ- 100

Not Specified. Expires on 26th Jun, 2019

neyveli, tamil nadu

Procurement of Digital Time Switch. ( 1 Item )

Not Specified. Expires on 27th Jun, 2019

navi mumbai, maharashtra

Supply of Digital Time Switch and Digital Energy Meter for JNPT

1.26 Lacs Expires on 03rd Jul, 2019

mumbai, maharashtra

BL SWITCH COMPLETE, AS PER CLW SPECIFICA

17.8 Lacs Expires on 25th Jun, 2019

kolkata, west bengal

Procurement of 100 Amp. rated moulded case circuit breaker etc.

5.26 Lacs Expires on 28th Jun, 2019

secunderabad, telangana

600 VA UPS with single phase

Not Specified. Expires on 26th Jun, 2019

mumbai, maharashtra

Complete barrier pedestal

Not Specified. Expires on 28th Jun, 2019

chennai, tamil nadu

Item Description: dual chamber pacemaker rate responsive ( dddr ) with appropriate atrial and ventricular bipolar steroid eluting with life warranty provision of pacing therapy for the use of the patients life- time including any no. of pulse generator replacements as clinically required ) and should have the latest technological features to provide proportionate, smooth and appropriate response of pacing rate to increased metabolic demand, should provide for atrial and ventricular pacing and sensing with choice of at least 16 modes of operation, latest technological features, appropriate safety features to avoid cross talk, optimum flexibility of programming ( including minimal av delay of 30msec or less and atrial sensitivity of 0. 2mv or less ), detailed data storage with easy retrieval and display of advanced diagnostics for ease of clinical follow up & maximal longevity. should be capable of programming for prolonging longevity and maximal cost effectiveness. should be capable of providing reliable ventricular capture with lowest battery drain so as to provide maximum longevity of the pacing system. ( preferably as an automatic feature where the pulse generator can perform a periodic threshold test and reliably verify ventricular capture and adjust ventricular pulse output parameters to minimize battery drain without compromising patient safety ). should have features for automatic management of arrhythmias ( including pacemaker mediated arrhythmias ) as well as automatic mode switching ( mode switch should be to and from ddd to ddi/ vvir, provision of rate responsive pacing after mode switch and automatic reversion to ddd after termination of mode switch triggering arrhythmias ). should have algorithms to promote intrinsic conduction. recording of atrial arrhythmia log. both atrial and ventricular channels should have provision for high energy output i.e. up to 6. 0 volts pulse amplitude and pulse width up to 1. 5ms, follow up diagnosis and rea ' a- programming should be rendered as effective as possible through provision of adequate information management systems on the programmer. the latest programmer with up dated software should be available permanently at the hospital. leads should be bipolar, steroid eluting and low profile either tined or screw. in ( 7f or smaller introducer individually ). leads should be from the same manufacturer i.e. manufactured by the same company as the pulse generator, not outsourced and marketed by one company. pulse generator and leads should be suitable for adult and pediatric patients. the manufacturers should have an established track record and presence in the market and should have facilities for simultaneous display of multiple surface ecg leads, intra cardiac electrograms, event markers; electronic calipers and for recording the same both on paper and electronic storage, media e.g. floppy disks etc. the programmer should have the latest software and should be available at all times in the hospital. the programmer should be user friendly and should provide maximum ease and efficiency of follow up assessment and automatic display of diagnostic data as required as well as follow up support at the hospital. should be approved by the us fda for intended clinical use in usa. the certificate from us- fda mentioning the validity of the period of the certificate should be submitted at the time of submission of tender. the manufacturer and supplier should have a well established track record and significant presence in the market and should provide latest programmer with appropriate software and follow up support at the hospital. the programmer should have facilities for simultaneous display of multiple surface ecg leads, intracardiac electrograms, event markers, electronic calipers, and for recording the same both on paper and in el

23.2 Lacs Expires on 10th Jul, 2019

bhubaneswar, odisha

Supply, Fitment and commissioning of C. C. T. V.

Not Specified. Expires on 28th Jun, 2019

bhiwani, haryana

The tender document shall be downloadable only to those prospective bidders who fulfill minimum Pre- Qualifying criterion as forth hereunder. The hard copy of documents duly signed meeting the requisite Pre- Qualifying criterion to be submitted by the prospective bidders along with request for issue of tender document accompanied by requisite tender document fees must reach the office of Director/ P & D ( TS ), BBMB, Chandigarh before 1700 hrs of dated 12. 06. 2019. 1 ) ( a ) The minimum Average Annual Financial Turnover for the last three ( 3 ) consecutive acing/ financial years ending 31st March/ 30th September/ 31st December ( as applicable ) must be at least Indian Rs. 9, 00, 00, 000/- ( Rupees Nine crore only ). ( b ) The prospective bidder shall furnish requisite copies of financial results viz profitability, turnover, balance sheet duly certified by authorized Charted Acant/ equivalent certifying authority of last 3 consecutive acing/ financial years ending 31st March/ 30th September/ 31st December ( as applicable ) indicating that they have financial capability, established resources and working capital to meet the financial obligations pursuant to the execution of the contract taking into ac other existing commitments and qualify the minimum requirements as above. 2 ) The prospective bidder shall be the original manufacturer of IEC- 61850 standard Numerical Line Differential, Numerical Distance Protection relays, Numerical Transformer Differential protection, Back up protection relays, REF protection, Bus Bar protection relays and IEC- 61850 standard Bay Control Units as well as Bay Control & Protection Units. In support of same the bidder is to furnish IEC- 61850 standard compliance certification from duly accredited National/ International Test House/ Lab like KEMA. The bidder is to give his credentials for his own make relays to be offered in case he is approved for participation in the NIT. 3 ) The prospective bidder must have an experience of supply of atleast five nos. IEC 61850 standard based Substation Automation System ( SAS ) equipment comprising Numerical IEDs, Servers, Ethernet Switches, Gateways etc., during last seven years when ed from date of NIT, in respect of 220kV or above voltage level substations to Government Public Sector Undertakings/ Government State Electricity Boards/ Government Power Sector Departments/ Government Power Sector Corporations located in India. 4 ) The prospective bidder shall furnish a satisfactory performance report for a minimum period of one year issued by two different Government Public Sector Undertakings/ Government State Electricity Boards/ Government Power Sector Departments/ Government Power Sector Corporations ( total two nos. performance reports ) located in India in respect of IEC 61850 standard based Substation Automation System ( SAS ) equipment comprising Numerical IEDs, Servers, Ethernet Switches, Gateways etc., which has been supplied and commissioned by the prospective bidder at 220kV or above voltage level substations belonging to the above saidutilities during the last seven years when ed from date of NIT. Note: SAS equipment supplied to private vendors/ parties by the prospective bidders for use by Government Public Sector Undertakings/ Government State Electricity Boards/ Government Power Sector Departments/ Government Power Sector Corporations located in India shall also be taken into consideration for the purpose of supply experience and performance reports. 5 ) The prospective bidder shall submit an undertaking that he has not been blacklisted or debarred by any Government Public Sector Undertakings/ Government State Electricity Boards/ Government Power Sector Departments/ Government Power Sector Corporations for which he has undertaken works/ services during the last seven years when ed from date of NIT. In the of any such information pertaining to the aforesaid matter found at any given point of time either during the course of the contract or at the bidding stage, his bid/ contract shall be liable for cancellation/ termination without any notice at the sole discretion of the purchaser. 6 ) Signing of IntegrityPact 6. 1 ) BBMB has adopted the Integrity Pact to promote integrity, transparency and competitiveness in BBMB & rsquos procurement of works/ services/ equipment etc. To implement the said Integrity Pact Concept, BBMB has appointed a panel of two IEMs ( Independent External Monitors ) and their details can be seen on the BBMB website- ( www. bbmb. gov. in ). For the implementation of Integrity Pact, an agreement between the Principal ( BBMB, the purchaser ) and tenderer is necessary in case of procurement of works/ services/ equipment etc. irrespective of whether it is from Foreign/ Indian tenderer. 6. 2 ) The tenderers are required to submit the said Agreement on non- judicial stamp paper of appropriate value ( Indian Rs. 15/- ) along with EMD and tender. Tenders not accompanied by the said agreement on behalf of tenderer shall not be considered and shall lead to outright rejection. This is the necessary pre- qualifying requirement to participate in the tendering process. In case of any complaint regarding tendering, the tenderer may contact Both or any one of the above IEMs. 6. 3 ) Following may also be noted:- a ) If the bidder has been disqualified from the tender process prior to the award of contract according to the provisions of the integrity pact, BBMB shall be entitled to demand and recover from the bidder liquidated damages amount by forfeiting the EMD/ bid security ( Bid Bond ) as per provisions of the integritypact. b ) If the contract has been terminated according to the provisions of the Integrity Pact, or if BBMB is entitled to terminate the contract according to the provisions of Integrity Pact, BBMB shall be entitled to demand and recover from the Contractor/ Security deposit as per IntegrityPact. 6. 4 ) The applicant shall confirm their acceptance to the above provisions in their request. IMPORTANT NOTES 1 ) The Purchaser reserves the right in respect of the following without assigning any reasons whatsoever:- a ) increase or decrease the above stated minimum pre- qualification requirements should the circumstances warrant for such a change in the overall interest of the Board, or, b ) amend the scope of work, or, c ) reject or accept any for reasons of not submitting request according to stipulated instructions including national defense or security consideration or wrong declaration or misconduct or, d ) factual incorrectness in submitted data/ documents, or, e ) cancel the process and reject any/ allapplication ( s ) 2 ) The Purchaser will neither be liable for any such actions without recourse to appeal nor be under any obligation to inform the Applicant of the grounds for his decision. 3 ) The Purchaser reserves the right to cross- check/ ascertain/ scrutinize the documentary evidences furnished by them along with their request, at any stage or request for any additional information/ documents from any or allApplicant ( s ). 4 ) Allowing of the Applicants to participate in further tendering process shall not be construed that they have fulfilled the prescribed eligibility criteria as laid down in NIT as they shallhave to meet with other requirements stipulated in TenderDocument. 5 ) e- Reverse Auction: e- Reverse Auction will be carried out in current NIT under the framework of BBMB rules after opening of price bid. Bidders who are technically qualified and submit the undertaking to BBMB can participate in e- Reverse Auction for which NIT is floated. Participation in e- Reverse Auction is mandatory for all eligible bidders. Any bidder not willing to submit such an undertaking shall be disqualified for further participation in respect of procurements in current NIT. 6 ) Notwithstanding anything stated above, the Purchaser reserves the right to inspect the manufacturing Works & Installations etc. at any stage to assess Applicant & rsquos capability to perform and the requisite scope of work, should the circumstances warrant such an assessment in the overall interest of the Purchaser.

13.2 Crores Expires on 17th Jul, 2019
1